Menu

Search Results for: power stability

Power System Stability & Control Course

Power System Stability & Control Course form
* Wajib
Name *
Jawaban Anda
Phone *
Jawaban Anda
Email *
Jawaban Anda
Message
Jawaban Anda
Kirim
Jangan pernah mengirimkan sandi melalui Google Formulir.
Konten ini tidak dibuat atau didukung oleh Google. Laporkan Penyalahgunaan - Persyaratan Layanan
 
 

Power System Stability & Control Course

DEVELOP Training Center (TM) menyelenggarakan Training Power System Stability & Control yang sangat berguna untuk mendapatkan skill tentang Design & Analisis pada Project Oil-Gas,Mining,Power Plant&Building, khususnya untuk analisa&kontrol Power System Stability.

Power System Stability adalah kemampuan sistem tenaga listrik/power system untuk mendapatkan kembali keadaan keseimbangan operasi/operating equilibrium setelah mengalami gangguan fisik dari semua variabel sistem disekitarnya.

Materi Training di DEVELOP Training Center (TM) dirancang khusus oleh para praktisi engineer dan designer disesuaikan dengan kebutuhan project. Anda akan mendapat sharing ilmu langsung dari para praktisi yang berpengalaman bertahun-tahun.

DEVELOP menerapkan Syllabus Training Power System Stability & Control dengan tahap-tahap pembelajaran berkualitas sbb :

Sesi 1-2 Power System Stability Overview,Classification,Steady state stability&Transient stability
      • Power System Stability Overview
      • Power System Stability Applicable Standards & Codes
      • Classification of Stability
      • Steady state stability&Transient stability
      • Rotor angle stability
      • Transient rotor angle stability
Sesi 3-4 Rotor angle stability,Frequency,Voltage stability & Power-Angle Relationship
  • Small&Large signal rotor angle stability
  • Frequency stability
  • Voltage stability & Power-Angle Relationship
  • Swing equation
  • Equal Area Criterion
Pembahasan materi mengetengahkan contoh-contoh latihan dalam konteks dunia proyek konstruksi sehingga lebih familier dengan aktivitas proyek sehari-
hari.

Selama training, instruktur kami akan menggunakan kombinasi teori serta praktek langsung dengan studi kasus yang telah dipersiapkan yang menyerupai Proyek nyata.

QUICK REGISTER :

* Required

Electrical Power Grid System Fundamentals Training

DEVELOP Training Center (TM) menyelenggarakan Kelas Electrical Power Grid System Fundamentals Training yang sangat berguna untuk mendapatkan skill tentang Power System/Sistem Grid Pembangkit,Analisa Aliran Daya,Stabilitas Daya dan teknis penting lain terkait perencanaan&operasi Pembangkit,Transmisi serta Distribusi Listrik.

Materi Training di DEVELOP Training Center (TM) dirancang khusus oleh para praktisi engineer dan designer disesuaikan dengan kebutuhan project. Anda akan mendapat sharing ilmu langsung dari para praktisi yang berpengalaman bertahun-tahun.

DEVELOP menerapkan Syllabus Kelas Electrical Power Grid System Fundamentals Training dengan tahap-tahap pembelajaran berkualitas sbb :

Sesi 1 -2 Power System Overview,OLD/SLD&Load Flow

Skill Focus:

  • Power Grid Overview
  • Electrical Power System Elements
  • Applicable Standards&Codes
  • One-Line Diagram (OLD)/Single Line Diagram (SLD)
  • Load Flow Study
  • Load Flow Calculation Methods (Newton-Raphson, Fast-Decoupled, Gaus-Siedel)
  • Fault Calculation Methods. (Impedance Method, Symmetrical Component Method)
  • Electrical Power Grid System Case Study
  • Calculation Analysis Flow Chart
  • Power Grid System Inputs-Outputs

Sesi 3-4 Short Circuit, Motor&Power Stability

Skill Focus:

  • Short-Circuit Study
  • Motor Starting Study Methods Calculation
  • Transient Stability Study&Power System Stability Limits
  • Harmonic Study, Parameters & Sources
  • Harmonic Analysis
  • QA checks of Power Grid Analysis Models
  • Electrical Power Grid Plots & Final Reports

 

Selama training, instruktur kami akan menggunakan kombinasi teori serta praktek langsung dengan studi kasus yang telah dipersiapkan yang menyerupai Proyek nyata.

QUICK REGISTER :

* Required

Transient Stability Analysis untuk High Voltage Electrical Training

DEVELOP Training Center (TM)  menyelenggarakan Kelas Transient Stability Analysis untuk High Voltage Electrical yang sangat berguna untuk mendapatkan skill tentang cara membangun desain & simulasi Power plant & Offshore/Onshore Platform sekaligus menavigasi serta meng-optimalisasi desain engineering.

Materi Training di DEVELOP Training Center (TM) dirancang khusus oleh para praktisi designer & engineer sesuai dengan kebutuhan project. Anda akan mendapat sharing ilmu langsung dari para praktisi yang berpengalaman.

DEVELOP mengimplementasikan Syllabus Training Transient Stability Analysis untuk High Voltage Electrical dengan tahap-tahap pembelajaran berkualitas sbb :

Sesi 1-2 Electrical Transient Overview,Short Circuit&Protection System

Skill Focus:

  • Transient Overview (Short Circuit & Protection System)
  • Macam Hubung Singkat
    • Single Line To Ground Fault Unbalance,Line To Line Fault Unbalance,Double Line To Ground Fault,Unbalance&Three Phase Fault Balance
  • Penyebab Hubung Singkat / Short Circuit
  • Efek Hubung Singkat (Internal-External Effects)
  • Penyebab Open Circuit (Kerusakan Conductor ,Circuit Breaker Malfunctions )
  • Efek Open Circuit
  • ANSI Standard, Short Circuit Current,Bentuk Kontribusi Arus&Sumber Arus Gangguan
  • ANSI Definition Of Terms, IEC Standard&IEC Short Circuit Current
  • DC Component

Sesi 3-4 Gangguan Sistem Tenaga Listrik,Sistem Proteksi,ANSI Standard Relay Device,Proteksi Trafo&Proteksi Motor

Skill Focus:

  • Gangguan Sistem Tenaga Listrik & Faktor Gangguan
  • Sistem Proteksi ,Fungsi Relay Proteksi&Syarat – Syarat Sistem Proteksi
    • Klasifikasi Relay (Instantaneous ,Definite Time Delay &Inverse)
    • Relay Analog-Digital,Parameter&Overtravel Time Relay
    • Fungsi Relay Pengaman & Peralatan Proteksi
    • Fuse & Karakteristik Fuse
  • Komponen Sistem Proteksi (Circuit Breaker, Cb (Sakelar Pemutus, Pmt), Fuse dll)
    • Relay Arus Lebih, Hubung Tanah, Diferensial, Jarak Trafo Arus (Current Transformer, Ct), Trafo Tengangan (Potential Transformer, Pt)
    • Grounding System (Pentanahan) , Circuit Breaker & Pemilihan Circuit Breaker
    • Diagram Blok Urutan Kerja Relay
    • Sensing,Trip/Signal Set,Control Element ,Tripping&Battery
    • Relai Pengaman,Pemutus Tenaga [ Pmt ], Trafo Arus/Trafo Tegangan,Battery / Aki & Wiring
    • Inrush Current & Fla (Full Load Ampere)
    • Relay Digital Proteksi Generator
    • Matrix Proteksi
  • ANSI Standard Relay Device Function (Transformator Pengukuran ,Transformator Tenaga,Transformator Pengukuran ,Transformator Arus (Ct) &Transformator Tegangan (Pt) )
    • Rangkaian Ct,Summing Ct,Pengaman Arus Lebih ,Over Current Relay &Skema Relay Arus Lebih
    • Rangkaian Relay Arus Lebih Seketika & Rangkaian Relay Arus Lebih Definit Time (Kurva Kerja Oc Time Definit,Waktu Kerja Relay Oc Definite Time )
    • Relay Arus Lebih Berbanding Terbalik,Rangkaian Relay Arus Lebih Inverse &Macam Kurva Inverse
    • Penggunaan Relay Arus Lebih & Gangguan Yang Diamankan
    • Standar British Bs 142-1983
  • Proteksi Trafo & Proteksi Motor (Nema Mg 1, Setting High Set (50 – Instant) ,Bagan Waktu Koordinasi ,Relay Pengaman ,Bagan Waktu Koordinasi ,Relay Pengaman ,Sensing-Signal-Fault)
  • Kordinasi Proteksi Yang Masih Salah & Koordinasi Proteksi Yang Sudah Diperbaiki (Grounding,Generator ,Trafo Generator ,Primer (Hv) Trafo Delta ,Sekunder Trafo (Lv)
  • Setting Ground Fault Relay, Jenis Relay Tegangan,Over Voltage (Tegangan Lebih),Under Voltage (Tegangan Kurang),Synchonism Check Device & Relay Differential

Materi Training di DEVELOP Training Center (TM) dirancang khusus oleh para praktisi designer & engineer sesuai dengan kebutuhan project. Anda akan mendapat sharing ilmu langsung dari para praktisi yang berpengalaman.

Selama training, instruktur kami akan menggunakan kombinasi teori serta praktek langsung dengan studi kasus telah dipersiapkan yang menyerupai Proyek nyata.

QUICK REGISTER :

* Required

ABOUT US

WHO IS DEVELOP ™?

DEVELOP Oil&Gas Training Center is a Training Provider Specialists for :

  1. Project Management
  2. Contract Supervision & Requirements Conformation with Quality Management System
  3. Engineering Detail Design Multi Discipline including Process Engineering, Structure Engineering, Piping and Mechanical Engineering & Instrumentation
  4. Geographical Information System Engineering

Over the years, DEVELOP Oil&Gas Training Center, has demonstrated capabilities in Training about Detail Engineering, and Oil/Gas Project Management.

The philosophy at DEVELOP is to provide quality training to its clients, within budget costs, and time schedules. DEVELOP pride itself in working with clients to achieve the successful conclusion of every training.

WHAT IS DEVELOP ™ CAPABILITIES AND RESOURCES

DEVELOP possess full range of Technical and Project Management capabilities backed by resources to execute Offshore/Onshore Oil/Gas related Training & Seminars. Such as Project Management, Contract Supervision, Quality Management System, Detail Design in multi discipline including Process Engineering, Structure Engineering, Piping and Mechanical Engineering, Instrumentation as well as Geographical Information System Engineering.

Our Capabilities include the following:

Project Management Quality Instructors, capable to train about:
1. Project Scope Management

  • Project Initiation, Chartering
  • Scope Planning, Scope Statement
  • Scope Definition, WBS Development

2.Project Time Management

  • Project Time Management Overview
  • Plan Project
  • Basic Concept of Critical Path Method (CPM)
  • Project Monitoring
  • Corrective Action
  • Communicate Schedule

3. Cost Management

  • Cost Estimating Overview
  • Cost Control Overview

4. Communication Management

  • Communication Planning
  • Information Distribution
  • Performance Reporting
  • Administrative Closure

5. Procurement Management

  • Procurement Planning
  • Bid Planning
  • Bidding & Source Selection
  • Contract Administration
  • Contract Close-out

6. Work Breakdown Structure
7. Schedule Development
8. Schedule Analysis – Critical Path Method
9. Schedule Update and Analysis

Quality Management System Quality Instructors, capable to train about:
Design of services

  • Contract & Requirements Conformation
  • Validation of processes (Monitoring and measurement)
  • Traceability & Post delivery activities
  • Outsourced design and development activities

PROCESS/CHEMICAL Engineering Quality Instructors, capable to train about:

  • Process simulation for Petro-chemical and Chemical complex.
  • PFD’s, MFD’s, P&ID’s.
  • Equipment and line sizing.
  • Mass and heat balance, Flow control.
  • Multiphase flow, Pipeline sizing.
  • Corrosion
  • Corrosion control.
  • Cathodic protection.

STRUCTURE Engineering Quality Instructors, capable to train about:

  1. Jackets and Topsides
  2. In-place engineering of Jackets and Topsides, soil/pile interaction.
  3. Load-out, sea fastening, transportation, stability, launch and upend.
  4. Assessment of new and existing platforms (fit for use).
  5. Push over analysis, ultimate capacity and failure risk analysis.
  6. Cost estimation.

MECHANICAL/PIPING Engineering Quality Instructors

  • Equipment design, selection, specifications.
  • Piping design and routing, isometrics, MTO’s.
  • Fire and safety.
  • Maintenance manuals.

ELECTRICAL&INSTRUMENTATION Engineering Quality Instructors

  • Load studies, power design, controls.
  • Line diagrams, C&E hook-up diagrams.
  • Control panels, switch gear, wiring diagrams.
  • Generator hook-up.

Geographical Information System (GIS) Engineering Quality Instructors

  • Planning and analysis such as forecasting and risk analysis
  • Asset/data management including systems integration, claims/case management, service/territory area management, and constituent/customer management
  • Business operations such as call center/dispatching; monitoring and tracking; field data collection; inspections, maintenance and operations; and routing
  • Situational awareness including decision support and customer/public access
×

Hello....

Please Click below to chat on WhatsApp

× How can we help ?
DEVELOP's educational commitment : to maintain professionalism and integrity in our work at all times, giving due respect to the environment and interest of society and the nation